✨✨6000W laser cleaning machine replacing the collimating lens✨✨
🔔🔔🔔The disassembly and assembly process needs to be carried out in a clean environment. When removing and installing the lenses, dust-free gloves or dust-free finger covers must be worn.
📢Clean the dust off the outer cover of the collimation mirror.
📢Loosen the fixing screws and remove the collimating lens module.
📢Stick on masking tape or adhesive tape to prevent dust from entering.
🎉Remove the pressure cap and take out the collimating lens for replacement.
🎉Check if the lens is clean. If it is not clean, use a dust-free cotton swab to wipe it clean.
🎉Install the collimating lens. Please ensure that the convex surface is facing upwards during installation.
💎Install the collimating lens module. During installation, align the gaps at both ends of the module in the direction of QBH.
💎Install the cover for the collimating lens.
Foster Laser
+86 153 1415 5887
www.fosterlaser.com
https://www.fosterlaser.com/
