🎉🎉6000w laser cleaning machine replacing the protective lenses🎉🎉
🔔The disassembly and assembly process needs to be carried out in a clean environment. When removing and installing the lenses, dust-free gloves or dust-free finger covers must be worn.
✅Clean the dust off the outer cover of the protective lens module.
✅Hold the two sides of the protective lens module and lift it out upwards.
✅Stick on masking tape or adhesive tape to prevent dust from entering.
✅Remove the protective lens and replace it.
✅Check if the lens is clean. If it is not clean, use a dust-free cotton swab to wipe it clean.
✅Install the lens onto the module.
✅Install the protective lens module.
Foster Laser
+86 153 1415 5887
www.fosterlaser.com
https://www.fosterlaser.com/
