🎉🎉6000W laser cleaning machine replacing the focusing lens🎉🎉
📢The disassembly and assembly process needs to be carried out in a clean environment. When removing and installing the lenses, dust-free gloves or dust-free finger covers must be worn.
✨Clean the dust off the exterior of the focusing lens.
✨Loosen the fixing screws and remove the focusing module.
✨Stick on masking tape or adhesive tape to prevent dust from entering.
✨Release the pressure cover and remove the focusing lens for replacement.
💎Check if the lens is clean. If it is not clean, use a dust-free cotton swab to wipe it clean.
💎Install the lens. Please make sure to install it with the convex surface facing downward.
💎Install the focusing module. Please note that when installing, the two notches at both ends of the module should face towards the grip.
💎Install the focusing cover
Foster Laser
+86 153 1415 5887
www.fosterlaser.com
https://www.fosterlaser.com/
