🎉🎉the replacement of the SUP22C collimator lens for laser cleaning machine🎉🎉
✨loosen the three set screws of the QBH lock
✨slowly remove the QBH lock
💎cover with masking tape to keep ash out
💎remove the locking ring remove the compression ring
💎replace the collimator lens
📢make sure the convex side of the lens is facing up after replacement, reinstall
🔔🔔the compression ring tighten the locking ring after replacement
🎉put the QBH lock back into the gun
🎉attention during installation
🎉make the mark on the bottom of the QBH lock with the upper set screw in a straight line
✨lock the setting screws
✨collimator lens replacement completed
📩Please feel free to contact us if you have any needs!
Foster Laser
+86 153 1415 5887
www.fosterlaser.com
https://www.fosterlaser.com/
