🔔Remove the fixing screws of the pressure plate
🔔Remove the fixing screws of the cover plate
🔔Remove the outer cover of the motor
✨Loosen the fixing screws of the Y-axis motor and remove the motor upwards
✨Apply masking tape or adhesive tape to prevent dust from entering
✨Loosen the fixing screws of the X-axis motor and remove the motor upwards
🔍Apply masking tape or adhesive tape to prevent dust from entering
🔍Take out the new Y-axis motor
💎Install the insulation sleeve for the Y-axis motor
💎Check if the Y-axis motor mirror is clean
🔔Remove the tape and insert the motor
💎Lock the screws and secure the motor
✨Install the motor wires Insert the motor wires into the wire trough
Please feel free to contact us if you have any needs!
Foster Laser
+86 153 1415 5887
www.fosterlaser.com
https://www.fosterlaser.com/
