✨The disassembly and assembly process should be carried out in a clean environment. When disassembling or assembling the lenses, dust-free gloves or dust-free finger covers must be worm.
✨Wipe the dust off the outer cover of the protective lens
✨Remove the pressure cap and lift the lens upwards
✨Press the cap firmly
Remove the tape and insert it into the protective lens module
📌📌Attention! Install the module gap in the direction towards the X-axis motor
Please feel free to contact us if you have any needs!
Foster Laser
+86 153 1415 5887
www.fosterlaser.com
https://www.fosterlaser.com/
