🎉🎉Fiber laser welding machine for metal and laser cleaning machine When the machine is running and an alarm message appears
✅METHOD 1 CHECK THE GAS PRESSURE
🔔First, click "OK"
🔔Then, turn on the pressure switch
✨Use an internal hexagonal screwdriver and rotate it counterclockwise to remove it
✨Make it level with the edge
✨Adjust the pressure gauge to the parameter that triggers the alarm
✨Use the hex socket screwdriver and rotate it clockwise slowly until it is fully screwed in
📌Until the light stops flashing, the red light will come on
📌Turn off the pressure switch
📌The system once again issued an alarm notification
💎Click "OK" to close the alarm notification
✅METHOD 2 MODIFY THE ALARM PRESSURE LEVEL SETTING
Please feel free to contact us if you have any needs!
Foster Laser
+86 153 1415 5887
www.fosterlaser.com
https://www.fosterlaser.com/
